Back to Blog
Repetier server orange raspberry pi5/4/2023 Initially the image is configured to run as access point. The last solution is using a smartphone or laptop with WLAN. It will get a IP from your DHCP server and you can connect to it using If you have a working touchscreen already, you can configure your WLAN directly on the display. The way that always works is using an ethernet connection. The first thing to do is connecting the Raspberry Pi to your internet. Later it will directly boot into the normal front end. So what you see is the registration page instead. At this point you have probably no internet connection and also no license entered (required for printer front end). If you have a HDMI display connected, you will already see the front end. Shut down any running instance and place your newly created image in your Raspberry Pi and boot. Tip: You can also set the wifi connection parameter in windows, see Search the line lcd_rotate=2Īnd set the rotation value: 0 is no rotation, 2 = 180°, 1 = 90°, 3 = 270°. If you have a screen connected, also check config.txt. Edit the file “repetier-image-setup.txt” to disable GUI. On windows you see only the /boot directory. If you have no screen on your pi, you can already disable that. To copy the file to your SD card, follow the steps described here: Also bigger cards live longer as we have more blocks to write to. Our preferred size is 32 GB, which offers a good compromise between space and price. On a 4 GB card you have only 2 GB free space left, so a bigger card is a good idea. For this you need a 4 GB SD card or bigger. ![]() img file, which you need to copy to your SD card. Installing the ImageĪfter you have downloaded the image, you need to unpack the zip file. Also a cheap usb cable with thin wires can cause voltage loss. Use a solid 3A power supply, best with 5.1 V output. ![]() If it does not receive stable 5V, you may experience stability issues like bad connections or temperature errors.
0 Comments
Read More
Leave a Reply. |